ABUS EC700: Difference between revisions

From Lockwiki
Jump to navigationJump to search
(New page for ABUS EC700)
 
Line 25: Line 25:
The [[ABUS]] EC700 utilizes [[dimple]] keys but functions the same as a standard [[pin-tumbler]] lock. The key is bitted on both sides of the blade and is reversible. The lock uses ten chambers for pin-tumbler stacks. Four chambers in a row on the top of the lock and six chambers in a row on the bottom. Each of those chambers contains a set of key pin, driver, and spring. To open the lock, all ten pin-tumblers must be aligned at the [[shear line]]. ''(See also [[Pin-tumbler#Principles_of_Operation|Pin-tumbler, Principles of Operation]])''
The [[ABUS]] EC700 utilizes [[dimple]] keys but functions the same as a standard [[pin-tumbler]] lock. The key is bitted on both sides of the blade and is reversible. The lock uses ten chambers for pin-tumbler stacks. Four chambers in a row on the top of the lock and six chambers in a row on the bottom. Each of those chambers contains a set of key pin, driver, and spring. To open the lock, all ten pin-tumblers must be aligned at the [[shear line]]. ''(See also [[Pin-tumbler#Principles_of_Operation|Pin-tumbler, Principles of Operation]])''


ABUS utilizes a variety of security features to deter picking. At least two of the brass pins in the bottom row are spooled [[security pin]]s. Standard pins have tapered edges to reduce feedback. Multiple rows of opposing pins are common in [[high pin count]] locks and the EC700 adds another obstacle through a less-common implementation of this design. The four pins of the top row are directly opposite pins from the bottom row and touch in the middle when the key is not present. This configuration complicates picking because the force of the much stronger bottom springs [[overset]]s the pins of the top row. Picking attacks tend to rely on dedicated tools to work around this initial state. The [[Kale Kilit 164 BNE]] is another lock that shares this design feature.
ABUS utilizes a variety of security features to deter picking. At least two of the brass driver pins in the bottom row are spooled [[security pin]]s. Standard pins have tapered edges to reduce feedback. Multiple rows of opposing pins are common in [[high pin count]] locks and the EC700 adds another obstacle through a less-common implementation of this design. The four pins of the top row are directly opposite pins from the bottom row and touch in the middle when the key is not present. This configuration complicates picking because the force of the much stronger bottom springs [[overset]]s the pins of the top row. Picking attacks tend to rely on dedicated tools to work around this initial state. The [[Kale Kilit 164 BNE]] is another lock that shares this design feature.


== See also ==
== See also ==



Revision as of 02:12, 2 December 2022

ABUS EC700

ABUS EC700
Abus EC700 euro cylinder - FXE47625.jpg
Name ABUS EC700
Manufacturer ABUS
Lock Type Cylinder
Lock Design Pin-tumbler, Dimple
Specifications
# of Components 10
Component Type Pin-tumbler



The Extra Classe 700, commonly referred to as the EC700, is a door cylinder lock made by ABUS. It is a dimple lock that uses the flat side of the key blade as a bitting area.

Principles of operation

The ABUS EC700 utilizes dimple keys but functions the same as a standard pin-tumbler lock. The key is bitted on both sides of the blade and is reversible. The lock uses ten chambers for pin-tumbler stacks. Four chambers in a row on the top of the lock and six chambers in a row on the bottom. Each of those chambers contains a set of key pin, driver, and spring. To open the lock, all ten pin-tumblers must be aligned at the shear line. (See also Pin-tumbler, Principles of Operation)

ABUS utilizes a variety of security features to deter picking. At least two of the brass driver pins in the bottom row are spooled security pins. Standard pins have tapered edges to reduce feedback. Multiple rows of opposing pins are common in high pin count locks and the EC700 adds another obstacle through a less-common implementation of this design. The four pins of the top row are directly opposite pins from the bottom row and touch in the middle when the key is not present. This configuration complicates picking because the force of the much stronger bottom springs oversets the pins of the top row. Picking attacks tend to rely on dedicated tools to work around this initial state. The Kale Kilit 164 BNE is another lock that shares this design feature.

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.