Search results
From Lockwiki
Jump to navigationJump to search
- ...acks - two chambers contain spooled drivers, the rest are tapered barrels. Chamber two contains a steel driver and key pin, the rest of pins is made of copper3 KB (437 words) - 22:34, 10 January 2023
- ...both are freely available. Both locks have six pin chambers, but the first chamber is left empty. Other than that, everything is identical to the FAB 3*** Pro3 KB (383 words) - 20:31, 12 June 2022
File:Nemef NF4 top pin least.png Nemef NF4 detail of blocking check pin in its chamber.(1,000 × 462 (494 KB)) - 21:04, 3 September 2022File:DOM Sigma pins least.png DOM Sigma pins. Note the serrated master wafer in chamber 4.(837 × 1,000 (879 KB)) - 11:12, 4 September 2022- ...e biasing bearings could be pushed into the bible and lodge partway in the chamber, preventing the plug from further movement.3 KB (534 words) - 16:14, 28 December 2022
File:Goal Z bearing chamber-Reinder.png |Description= [[Goal Z]] plug, showing side bearing chamber.(1,000 × 750 (944 KB)) - 21:30, 9 November 2022File:GOAL P pin chamber-Reinder.png |Description=A pin chamber in a [[Goal P |GOAL P]], with countermilling and overmilling.(300 × 300 (155 KB)) - 12:58, 31 January 2023- File:GOAL_P_pin_chamber-Reinder.png | Overmilling and countermilling in a pin chamber.2 KB (317 words) - 13:02, 31 January 2023
- ...core, housing, and key may only be milled for the active pins. Each active chamber contains a set of key pin, driver, and spring.4 KB (654 words) - 14:13, 2 February 2023
- ...ower can be used to remove the core. Particular care must be taken as each chamber position contains pins on bot top and bottom of the core and cylinder housi4 KB (599 words) - 12:31, 3 February 2023
- ...nt of the pin chambers at the 12 o'clock position. Rods near the third pin chamber in the plug and cylinder are also common.6 KB (895 words) - 11:50, 21 February 2023
File:MTL 300 core bottom least.png |Description=MTL 300 core from the bottom. Note the shape of chamber 5, holding the telescoping pin.(1,000 × 398 (491 KB)) - 07:45, 26 February 2023File:MTL CP pins least.png |Description=Mul-T-Lock ClassicPRO pins. Please note the split pin in chamber 5 is upside down by accident.(654 × 1,000 (761 KB)) - 08:09, 26 February 2023- ...n both the left and the right side, that seem to be aligned with the first chamber, which would suggest the possibility of the construction keying.7 KB (1,114 words) - 10:03, 26 February 2023
- ...of those chambers contains a set of key pin, driver, and spring. A seventh chamber on the right side of the bible contains a sprung bearing that aligns with a3 KB (422 words) - 13:24, 2 May 2023
- File:West 917 core + construction drilling - FXE47893.jpg | 917 core with chamber overmilling24 KB (3,613 words) - 12:46, 11 August 2023
- # Remove the chamber casings and take out each pin-stack individually409 bytes (55 words) - 21:52, 13 July 2009
- ...nt of the pin chambers at the 12 o'clock position. Rods near the third pin chamber in the plug and cylinder are also common.4 KB (666 words) - 22:47, 27 January 2023
- ...Each pin has a tapered end surrounded by a spring at the bottom of the pin chamber. Two sidebars are used at 3 and 9 o'clock in the [[plug]], and each set of4 KB (663 words) - 08:51, 3 January 2023
- ...eplate from the front of the plug to access the moving element and the pin chamber cover.5 KB (843 words) - 14:05, 12 January 2023