Search results

Page title matches

• File:Astral antidril chamber least.png Cisa Astral core - antidrill chamber (empty in this model). (1,000 × 409 (475 KB)) - 21:42, 25 December 2021

• File:Goal Z bearing chamber-Reinder.png |Description= [[Goal Z]] plug, showing side bearing chamber. (1,000 × 750 (944 KB)) - 21:30, 9 November 2022

• File:GOAL P pin chamber-Reinder.png |Description=A pin chamber in a [[Goal P |GOAL P]], with countermilling and overmilling. (300 × 300 (155 KB)) - 12:58, 31 January 2023

Page text matches

• Glossary
  chamber The holes in cylinder housings that house top pins (drivers) and springs. master pins Small pins sometimes called wafers to build up chamber pin loading in pin tumbler master keyed cylinders.
  132 KB (23,589 words) - 12:43, 10 August 2021
• Nemef NF4
  ...t there are only two possible checkpin heights. The checkpin driver in the chamber that contains a checkpin that needs lifting is fully inside the core, expos ...res by 45 degrees (with no rotation a checkpin driver might enter an empty chamber) and carefully remove the cam. Then apply the shim (easier said than done),
  5 KB (775 words) - 23:11, 25 December 2022
• Begin pin tumbler
  ...to the first pin. Possibly you can feel a very small rough edge of the pin chamber just before bumping into the pin ...pick against the furthest ward. Can you feel the pick tip entering the pin chamber a bit at some point?
  14 KB (2,279 words) - 14:19, 16 January 2023
• Pin tumbler
  ...thumb|right|text-top|300px|[[Medeco]] biaxial key, pin pairs, springs, and chamber caps.]] ...weren't raised higher than necessary. The addition of a second pin in each chamber allowed for [[Positive_locking|positive locking]] when components were rais
  6 KB (990 words) - 09:44, 27 December 2022
• Comb pick
  ...Comb picks may either compress springs or forcibly remove poorly fastened chamber casings to allow springs and pins to be moved further. ...he use of screwed or riveted chamber casings prevent forced removal of the chamber casing.
  2 KB (283 words) - 18:44, 7 January 2010
• ABUS 80TI
  ...ed pinning shoe will work. If not, the driver pins will shoot in the empty chamber when you pull the plug out. ...tire pin stack can be lifted, using a [[comb pick]], into the driver's pin chamber, allowing plug rotation.
  3 KB (418 words) - 16:48, 7 March 2023
• Kwikset Titan
  ...disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying. # Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all t
  4 KB (478 words) - 13:52, 22 December 2022
• WEST 917
  ...of those chambers contains a set of key pin, driver, and spring. A seventh chamber in the bible on the right side contains a spring-biased bearing that aligns File:West 917 core + construction drilling - FXE47893.jpg | 917 core with chamber overmilling
  5 KB (703 words) - 14:10, 2 February 2023
• FAB 2000
  ...to roughly 7:00 o'clock position - driver entering the empty slider spring chamber might be the result. ...the slider springs aren't symetrical - the wider end belongs to the spring chamber, while the narrower touches the slider.
  5 KB (762 words) - 20:00, 23 November 2021
• Kwikset Classic
  ...disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying. # Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all t
  4 KB (448 words) - 15:33, 26 May 2021
• Master Lock No 140
  ...four pin stacks. Older versions of the lock use one spool pin in the third chamber, more recent versions may have the spool in a random position or no spool a ...entire pin stack can be lifted with a [[comb pick]] into the driver's pin chamber, allowing plug rotation.
  2 KB (356 words) - 13:57, 26 December 2022
• Master key
  ...e cut in common with the top master key and most locks have at least one [[chamber]] with no master pins in it. ...n common with the top master key and most locks have a master pin in every chamber. This method is useful for producing systems with many levels of keying. So
  6 KB (1,027 words) - 20:22, 25 June 2021
• Bumping
  ...cause problems with rekeying unless the position and height of the shadow chamber can be identified by the locksmith.
  8 KB (1,313 words) - 21:11, 24 March 2022

• File:C3000 pins least.png Cisa C3000 pins detail - note the pin-in-pin driver in chamber 4 and its special spring. (1,000 × 856 (1.16 MB)) - 21:37, 25 December 2021

• Corbin Emhart
  # Remove the pin chamber casing and remove the pin stacks.
  6 KB (866 words) - 13:14, 11 August 2023

• File:Astral antidril chamber least.png Cisa Astral core - antidrill chamber (empty in this model). (1,000 × 409 (475 KB)) - 21:42, 25 December 2021

• File:Astral bible least.png Cisa Astral bible - only antidrill insert chamber visible, the rest is polished out. (1,000 × 208 (246 KB)) - 21:43, 25 December 2021

• CISA C2000
  The C2000 contains five pin-tumbler pairs. One pin chamber contains a standard driver, two have [[Security_pin |spools]], and two have
  3 KB (409 words) - 12:21, 25 December 2022
• CISA C3000
  File:C3000 pins least.png|CISA C3000 pins detail. Note the BKP driver in chamber 4.
  3 KB (403 words) - 17:52, 24 March 2022
• DOM Plura
  ...acks - two chambers contain spooled drivers, the rest are tapered barrels. Chamber two contains a steel driver and key pin, the rest of pins is made of copper
  3 KB (437 words) - 22:34, 10 January 2023

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)