Master Lock No 1: Difference between revisions
mNo edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
| patent = | | patent = | ||
| related = | | related = | ||
} | |||
The '''No. 1''' is a [[pin-tumbler]] [[padlock]] made by [[Master Lock]]. The No. 1 uses a laminated padlock body with an internal key-in-knob-style [[cylinder]]. The inner cylinder uses four pin stacks and does not use any [[security pin]]s. | The '''No. 1''' is a [[pin-tumbler]] [[padlock]] made by [[Master Lock]]. The No. 1 uses a laminated padlock body with an internal key-in-knob-style [[cylinder]]. The inner cylinder uses four pin stacks and does not use any [[security pin]]s. | ||
Revision as of 17:51, 4 June 2012
Master Lock No. 1
{{Lock model | name = Master Lock No. 1 | Img = File:Mastercommercial.JPG | Img_size = 150px | maker = Master Lock | lock_type = Padlock, Cylinder | lock_design = Pin-tumbler | years_produced = | patent = | related = }
The No. 1 is a pin-tumbler padlock made by Master Lock. The No. 1 uses a laminated padlock body with an internal key-in-knob-style cylinder. The inner cylinder uses four pin stacks and does not use any security pins.
The No. 1 is one of the most common low security padlocks used in the United States.
Principles of operation
The No. 1 cylinder is a pin-tumbler lock with four pin stacks and no security pins. The cylinder typically uses the M1 key profile but may use other profiles, as well. The standard No. 1 can be opened in both directions but the "commercial" series body restricts opening to clockwise rotation. The No. 1 is not a key retaining padlock.
Disassembly instructions
The No. 1 cannot be disassembled non-destructively. To disassemble it the rivets that hold the laminated body together must be removed and each layer removed individually. The inner cylinder itself can be disassembled in the same manner as a traditional pin-tumbler lock:
- Remove the cam or C-clip.
- Insert the key and turn the plug 45-90 degrees.
- Withdraw the plug from the cylinder. (A plug follower is recommended)
OR
- Remove the chamber casings and take out each pin-stack individually
- Remove the cam or C-clip.
- Withdraw the plug from the cylinder.
Notes
- The No. 1 cylinder requires a small diameter plug follower.
- The No. 1 plug is retained by a crimp, rather than a C-clip or cam. Above are the generic pin-tumbler disassembly instructions.
Vulnerabilities
The No. 1 is vulnerable to a wide range of attacks. The reduced pin tumbler count and poor manufacturing tolerances makes it an easy lock to pick. It's commonly given to locksport beginners as a "confidence lock"; a lock that is easy to open and inspires you to continue picking. The No. 1 may be vulnerable to one or more of the following:
Gallery
A cutaway No. 1 padlock and cylinder.
