Template:Pin-tumbler standard disassembly

1. Remove the cam or C-clip.
2. Insert the key and turn the plug 45-90 degrees.
3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

1. Remove the chamber casings and take out each pin-stack individually
2. Remove the cam or C-clip.
3. Withdraw the plug from the cylinder.

Template documentation

This documentation is transcluded from Template:Pin-tumbler standard disassembly/doc. (edit | history)

This template is used on lock-specific pages in the Disassembly instructions section.

This particular template is used for pin-tumbler cylinders that require the standard disassembly procedures, without concern for additional components or any special considerations (such as trap pins, ball bearings, etc).