File:FAB NZS3 core sleeve least.png: Difference between revisions
From Lockwiki
Jump to navigationJump to search
(FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly.) |
(No difference)
|
Latest revision as of 17:30, 17 November 2021
Summary
FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly.
Licensing
   |
This file is licensed under the Creative Commons Attribution ShareAlike 3.0 License. In short: you are free to share and make derivative works of the file under the conditions that you appropriately attribute it, and that you distribute it only under a license identical to this one. Official license Subject to disclaimers. |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:30, 17 November 2021 |  | 1,000 × 901 (1.04 MB) | Least (talk | contribs) | FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly. |
You cannot overwrite this file.
File usage
The following page uses this file:
