Weslock Classic: Difference between revisions

From Lockwiki
Jump to navigationJump to search
 
Line 101: Line 101:
[[Category:Weslock|Classic]]
[[Category:Weslock|Classic]]
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]
[[Category:Lock models]]

Latest revision as of 13:50, 22 December 2022

Weslock Classic

Weslock Classic
Name Weslock Classic
Manufacturer Weslock
Lock Type Cylinder
Lock Design Pin-tumbler


The Classic is a pin-tumbler lock made by Weslock.



Principles of operation

See also: Pin-Tumbler (Principles of Operation)

The Classic is a traditional pin-tumbler that uses five pin stacks. To open the lock, all pin stacks must be aligned at the shear line to allow the plug to rotate. There are ten key pin heights and eleven key cut depths with the use of master pins.

The Classic has a MACS of 5. Many Classic cylinders come with construction keying dimples on the plug.


Keying Specifications

Cut Spacing Depth Key Pin Master Driver
0 n/a .330" .156" n/a .172"
1 .218" .314" .172" n/a .172"
2 .374" .299" .188" .031" .172"
3 .530" .283" .203" .047" .172"
4 .686" .268" .219" .062" .172"
5 .842" .252" .234" .078" .125"
6 n/a .236" .250" .094" .125"
7 n/a .221" .266" .109" .125"
8 n/a .205" .281" .125" .125"
9 n/a .190" .297" .140" .125"


Key Blank Effective Plug Diameter Shoulder to First Cut Root to Root Depth Increment Cut Width MACS
4425, 1175, WK1, WK2 .484" .218" .156" .016" .080" 5


Disassembly instructions

The Classic can be disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying.

  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.


Removing cylinders from Weslock knobs

  1. Remove the knob from the rose by turning the knob to the extreme left.[1]
  2. Rotate the cylinder plug 180 degrees. Pull the cylinder from the front of the knob.

Vulnerabilities

The Classic may be vulnerable to one or more of the following:


Gallery

References

See also