WEST 916: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (no HPC)
m (→‎Principles of operation: add sprung bearing on right side)
Line 23: Line 23:


== Principles of operation ==
== Principles of operation ==
The [[WEST]] 916 utilizes [[dimple]] keys but functions the same as a standard [[pin-tumbler]] lock. The lock uses 12 chambers for pin-tumbler stacks.  Each of those chambers contains a set of key pin, driver, and spring. The dimple key of the 916 has four cut depths for key pins. The key is bitted on the sides of the blade and is reversible. To open the lock, all 12 pin-tumblers -- across both rows of pins -- must be aligned at the [[shear line]]. ''(See also [[Pin-tumbler#Principles_of_Operation|Pin-tumbler, Principles of Operation]])''
The [[WEST]] 916 utilizes [[dimple]] keys but functions the same as a standard [[pin-tumbler]] lock. The lock uses 12 chambers for pin-tumbler stacks.  Each of those chambers contains a set of key pin, driver, and spring. A seventh chamber on the right side of the bible contains a sprung bearing that aligns with an indent in the core to center-bias it.


WEST utilizes a variety of [[security pin]]s to deter picking. Pin stacks incorporate stainless steel key pins with two sizes of brass driver pins to match. The 916 uses a mix of mushroom spool drivers and standard ones. Drivers are cupped to allow the spring to nest inside the pins. Key pins are a combination of t-pins and multi-section tapered spools which are torpedo shaped to create overset traps. These pin designs match over- and counter-milling of the pin chambers in the core to catch pins as they are lifted to shear.
The dimple key of the 916 has four cut depths for key pins. The key is bitted on the sides of the blade and is reversible. To open the lock, all 12 pin-tumblers -- across both rows of pins -- must be aligned at the [[shear line]]. ''(See also [[Pin-tumbler#Principles_of_Operation|Pin-tumbler, Principles of Operation]])''
<!-- It also contains a core-centering ball bearing. -->
 
WEST utilizes a variety of [[security pin]]s to deter picking. Pin stacks incorporate stainless steel key pins with two sizes of brass driver pins to match. The 916 uses a mix of mushroom spool drivers and standard ones. Drivers are cupped to allow the spring to nest inside the pins. Key pins are a combination of t-pins and multi-section tapered spools which are torpedo shaped to create overset traps. These pin designs match [[overmilling]] of the pin chambers in the core to catch pins as they are lifted to shear.


== Gallery ==
== Gallery ==

Revision as of 18:37, 13 December 2022

WEST 916



WEST 916
West 916 front view keyway - FXE47527.jpg
Name WEST 916
Manufacturer WEST
Lock Type Cylinder
Lock Design Pin-tumbler, Dimple
Specifications
# of Components 12
Component Type Pin-tumbler
Related Locks
WEST 917

The 916 is a dimple lock made by the Japanese company WEST. It contains 12 pins, arranged in two opposing rows of six on the left and right of the keyway.

Please note: the 916 is very similar to the larger, 20-pin WEST 917 model. The two locks share the same pins, fundamental designs, and primary security features.


Principles of operation

The WEST 916 utilizes dimple keys but functions the same as a standard pin-tumbler lock. The lock uses 12 chambers for pin-tumbler stacks. Each of those chambers contains a set of key pin, driver, and spring. A seventh chamber on the right side of the bible contains a sprung bearing that aligns with an indent in the core to center-bias it.

The dimple key of the 916 has four cut depths for key pins. The key is bitted on the sides of the blade and is reversible. To open the lock, all 12 pin-tumblers -- across both rows of pins -- must be aligned at the shear line. (See also Pin-tumbler, Principles of Operation)

WEST utilizes a variety of security pins to deter picking. Pin stacks incorporate stainless steel key pins with two sizes of brass driver pins to match. The 916 uses a mix of mushroom spool drivers and standard ones. Drivers are cupped to allow the spring to nest inside the pins. Key pins are a combination of t-pins and multi-section tapered spools which are torpedo shaped to create overset traps. These pin designs match overmilling of the pin chambers in the core to catch pins as they are lifted to shear.

Gallery

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.