Pick gun: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (→‎Principles of Operation: Including difference between downward and upward picking guns.)
m (Grammar fixes, thanks for the update!)
 
Line 17: Line 17:
'''Notes'''
'''Notes'''
* The use of [[security pin]]s does not hinder movement of the pins unless tension is applied prematurely.
* The use of [[security pin]]s does not hinder movement of the pins unless tension is applied prematurely.
* Pick guns are available in both downward and upward picking positions, depending on the orientation of the lock, although pick guns work regardless of the orientation it is often difficult to use one upside down.
* Pick guns are available in both downward and upward picking motions, depending on the orientation of the lock cylinder. Although pick guns work regardless of the orientation it may be difficult to use one upside down.


== Electric Pick Guns ==
== Electric Pick Guns ==

Latest revision as of 15:28, 8 July 2011

Pick Guns

A standard manual pick gun and tension tool.

A pick gun (or snapper pick, snap gun, vibration pick, electric pick) is a lockpicking tool used to rapidly open pin-tumbler based locks. Pick guns are manual or electric, and are a common tool for locksmiths. The use of pick guns is classified as covert entry because they leave distinct forensic evidence. Pick guns are similar in function to bump keys.

History

Add to me!

Principles of Operation

The pick gun needle is inserted into the keyway below the bottom pins and a tension tool is used to apply light tension to the plug. The trigger of the gun is fired, causing the needle to impact all pin stacks simultaneously. The kinetic energy travels to the top pins, causing them to jump. If all top pins jump above the shear-line, the plug will be free to rotate. Pick guns often require several attempts to pick the lock, but are effective against most low to mid security pin-tumbler locks.

Notes

  • The use of security pins does not hinder movement of the pins unless tension is applied prematurely.
  • Pick guns are available in both downward and upward picking motions, depending on the orientation of the lock cylinder. Although pick guns work regardless of the orientation it may be difficult to use one upside down.

Electric Pick Guns

An electic pick gun and tension tools.

Electric pick guns use a motor or electromagnet to continuously oscillate the needle. The needle is placed under all pins and vibrates, hoping to vibrate at a resonating frequency that will cause all top pins to jump above the shear line, allowing the plug to turn. The resonating frequency is an important feature in electric pick guns, but few actually allow this to be controlled directly. Most products advise the user to turn the tool off and on repeatedly to vary the motor speed.

Electric pick guns leave a much greater amount of forensic evidence than manual pick guns because of their constant movement when inside the lock.

Due to the high cost of electric pick guns, many low-cost homemade alternatives exist. Most modify a device to include the use of a needle on an existing motor or electromagnet. Products include electric toothbrushes, scissors, and screwdrivers.


See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.