Master Lock No 930: Difference between revisions

From Lockwiki
Jump to navigationJump to search
(→‎Master Lock No. 930: added info on pins)
 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
|patent=
|patent=
|related=
|related=
| spec_on      = true
| spec_comptype = [[Pin_tumbler |Pin-tumbler]]
| spec_comp    = 5
}}
}}


Line 46: Line 49:
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]
[[Category:Padlocks]]
[[Category:Padlocks]]
[[Category:Lock models]]
{{Stub}}
{{Stub}}

Latest revision as of 14:00, 26 December 2022

Master Lock No. 930

Master Lock No. 930
Name Master Lock No. 930
Manufacturer Master Lock
Lock Type Padlock
Lock Design Pin-tumbler
Specifications
# of Components 5
Component Type Pin-tumbler


The 930 (or 6230) is a pin-tumbler padlock made by Master Lock. The padlock, made of steel, is solid-body with an exposed shackle. It has a removable cylinder to allow rekeying and will accept Master Pro Series cylinders. Pins have been variously reported as all standard or all spooled driver pins.

Principles of operation

Add to me!

Disassembly instructions

To disassemble a Master Lock 930 padlock, do the following:

  1. Unlock the padlock and retract the shackle.
  2. Remove the retaining screw in the shackle hole using an allen wrench / hex key.
  3. Remove the retainer pin from the bottom of the padlock.
  4. Remove the keyway shield from the bottom of the padlock.
  5. Remove the cylinder from the padlock. Take care to not let the locking ball bearings fall out of the lock. If necessary they can be held in place with grease for reassembly.

Vulnerabilities

The 930 may be vulnerable to one or more of the following:

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.