Master Lock No 2: Difference between revisions

From Lockwiki
Jump to navigationJump to search
(Created page with "= Master Lock No. 2 = {{Lock model | name = Master Lock No. 2 | Img = File:MasterNo2.jpeg | Img_size = 150px | maker = Master Lock | lock_type = Padlock, Cylinder...")
 
m (→‎See also: added category:lock models)
Line 51: Line 51:
== See also ==
== See also ==


* [[Master Lock]]
* [[Padlock]]
* [[Padlock]]
* [[Pin-tumbler]]
* [[Pin_tumbler|Pin-tumbler]]
* [[Master Lock]]


[[Category:Lock models]]
[[Category:Master Lock]]
[[Category:Padlocks]]
[[Category:Padlocks]]
[[Category:Master Lock|No 2]]
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]

Revision as of 02:21, 7 April 2021

Master Lock No. 2

Master Lock No. 2
MasterNo2.jpeg
Name Master Lock No. 2
Manufacturer Master Lock
Lock Type Padlock, Cylinder
Lock Design Pin-tumbler


The No. 2 is a pin-tumbler padlock made by Master Lock. The No. 2 uses a laminated brass padlock body with an internal key-in-knob-style cylinder. The inner cylinder uses four pin stacks and does not use any security pins.

The No. 2 is a common low security padlocks used in the United States.


Principles of operation

The No. 2 cylinder is a pin-tumbler lock with four pin stacks and no security pins. The cylinder typically uses the M1 key profile but may use other profiles, as well. The standard No. 2 can be opened in both directions but the "commercial" series body restricts opening to clockwise rotation. The No. 2 is not a key retaining padlock.

Disassembly instructions

The No. 2 cannot be disassembled non-destructively. To disassemble it the rivets that hold the laminated body together must be removed and each layer removed individually. The inner cylinder itself can be disassembled in the same manner as a traditional pin-tumbler lock:

  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.


Notes

  • The No. 2 cylinder requires a small diameter plug follower.
  • The No. 2 plug is retained by a crimp, rather than a C-clip or cam. Above are the generic pin-tumbler disassembly instructions.

Vulnerabilities

The No. 2 is vulnerable to a wide range of attacks. The reduced pin tumbler count and poor manufacturing tolerances makes it an easy lock to pick. It's commonly given to locksport beginners as a "confidence lock"; a lock that is easy to open and inspires you to continue picking. The No. 2 may be vulnerable to one or more of the following:

Gallery

See also