Kwikset Classic: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (→‎Vulnerabilities: added Bumping)
m (→‎Kwikset Classic: added photo of deadbolt with keyway and logo)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=Kwikset Classic=                                                                             
=Kwikset Classic=                                                                             


{{Lock model
|name=Kwikset Classic
|Img=File:Kwikset_keyway_logo.png
|maker=[[Kwikset]]
|lock_type=[[Cylinder]]
|lock_design=[[Pin-tumbler]]
|related=[[Kwikset SmartKey]]
|patent=
|years_produced=1950s - Present
}}
                                                                            
                                                                            
The standard Kwikset cylinder is a [[pin-tumbler]] lock. It uses five chambers of key pins, drivers, and springs.  In the United States, it is one of the most common cylinders used in residential door locks.  
The '''Classic''' is a [[pin-tumbler]] lock made by [[Kwikset]]. It is one of the most common cylinders used in residential door locks in the United States. The KW1 keyway used by the Classic is extremely popular in North America, with many other companies providing interoperable locks and keys.
 
The Classic is slowly being phased out by the [[Kwikset SmartKey]] due to concerns over [[key bumping]].




__TOC__
__TOC__


== Principles of Operation ==
The standard Kwikset cylinder uses five chambers of pins that span the gap between the plug and the shell, preventing rotation of the plug within the shell.  There are six key pin heights, and seven key cut depths with the use of master pins. Kwikset uses key pins that are slightly tapered on both ends.
== Specifications ==
Key blank 1176, KW1
Estimated plug diameter .498"
Shoulder to first cut .247", spacing center to center .150"
Depth increment .023"
Cut width .080"
MACS = 4


== Principles of operation ==


<pre>
:''See also: [[Pin-tumbler#Principles_of_Operation|Pin-Tumbler (Principles of Operation)]]''
Cut | Spacing | Depth | Key Pin | Master | Driver


1    .247"    .329"  .172"    .023"    .180"
The Classic is a traditional pin-tumbler that uses five pin stacks. To open the lock, all pin stacks must be aligned at the [[shear line]] to allow the [[plug]] to rotate. There are six key pin heights and seven key cut depths, the seventh only used when combined with [[Master keying|master pins]] or construction balls. The Classic has a [[MACS]] of 4. Many Classic cylinders come with [[construction keying]] dimples on the plug.


2    .397" .306"  .195"    .046"    .180"
The Classic uses key pins that are slightly tapered on both ends. Classic cylinders do not require use of any [[security pin]]s, but often come with a couple spool drivers.


3    .547" .283"  .218"    .069"    .180"
== Keying Specifications ==


4     .697" .260"   .241"     .092"   .180"
{| border="1" cellpadding="5" cellspacing="0"
|- bgcolor="#e0e0e0"
|'''Cut''' || '''Spacing''' || '''Depth''' ||'''Key Pin''' ||'''Master''' ||'''Driver'''
|-
|1 || .247" || .329" || .172" || .023" || .180"
|-
|2 || .397" || .306" || .195" || .046" || .180"
|-
|3 || .547" || .283" || .218" || .069" || .180"
|-
|4 || .697" || .260" || .241" || .092" || .180"
|-
|5 || .847" || .237" || .264" || .115" || .180"
|-
|6 || .997" || .214" || .287" || .138" || .180"
|-
|7 || .191" || n/a || n/a || n/a || n/a
|}


5    .847" .237"  .264"    .115"    .180"


6    .997" .214"   .287"     .138"   .180"
{| border="1" cellpadding="5" cellspacing="0"
|- bgcolor="#e0e0e0"
| '''Key Blank''' || '''Plug Diameter''' || '''Shoulder to First Cut''' || '''Root to Root''' || '''Depth Increment''' || '''Cut Width''' || '''MACS'''
|-
| 1176, KW1 || ~.498" || .247" || .150" || .023" || .080" || 4
|}


7              .191"
</pre>


== Disassembly instructions ==
== Disassembly instructions ==


The Classic can be disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying.


# Remove the cylinder from the housing, either by removing the screws (deadbolts) or releasing the retaining clips (key in knob cylinders).
{{Pin-tumbler standard disassembly}}
# Remove the C-clip plug retainer from the cylinder.
# Remove the plug from the core, either by using a working key or manipulating the pins so that they do not block the shear line.


==== Removing cylinders from Kwikset knobs ====


# Using the Cylinder Removing Tool, rotate the round spindle until the tab lines up with the bolt stems.<ref>[http://www.kwikset.com/Libraries/Literature/Rekeying_Manual.sflb.ashx Kwikset Rekeying Manual]</ref>
# Slide the tool under the spring housing behind the spindle and push to release the retainer. Pull out the spindle without rotating it.
# Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all the way in and apply pressure until the cylinder is forced out of the front of the knob.


== Vulnerabilities ==
== Vulnerabilities ==
The Classic may be vulnerable to one or more of the following:


* [[Lockpicking]]  
* [[Lockpicking]]  
* [[Bumping]]
* [[Bumping]]
* [[Impressioning]]
* [[Impressioning]]
* [[Bypass]]
* [[Decoding]]
* [[Destructive entry]]
 
'''Notes'''
* Poor tolerances allow [[tryout keys]] to work.


== Gallery ==
== Gallery ==
Line 73: Line 93:
== See also ==
== See also ==
* [[Kwikset]]
* [[Kwikset]]
* [[pin-tumbler]]
* [[Pin-tumbler]]


[[Category:Kwikset]]
[[Category:Kwikset|Classic]]
[[Category:Pin-tumbler_locks]]
[[Category:Lock models]]
[[Category:Pin-tumbler locks]]

Latest revision as of 15:33, 26 May 2021

Kwikset Classic

Kwikset Classic
Kwikset keyway logo.png
Name Kwikset Classic
Manufacturer Kwikset
Lock Type Cylinder
Lock Design Pin-tumbler
Year(s) Produced 1950s - Present
Related Locks
Kwikset SmartKey


The Classic is a pin-tumbler lock made by Kwikset. It is one of the most common cylinders used in residential door locks in the United States. The KW1 keyway used by the Classic is extremely popular in North America, with many other companies providing interoperable locks and keys.

The Classic is slowly being phased out by the Kwikset SmartKey due to concerns over key bumping.



Principles of operation

See also: Pin-Tumbler (Principles of Operation)

The Classic is a traditional pin-tumbler that uses five pin stacks. To open the lock, all pin stacks must be aligned at the shear line to allow the plug to rotate. There are six key pin heights and seven key cut depths, the seventh only used when combined with master pins or construction balls. The Classic has a MACS of 4. Many Classic cylinders come with construction keying dimples on the plug.

The Classic uses key pins that are slightly tapered on both ends. Classic cylinders do not require use of any security pins, but often come with a couple spool drivers.

Keying Specifications

Cut Spacing Depth Key Pin Master Driver
1 .247" .329" .172" .023" .180"
2 .397" .306" .195" .046" .180"
3 .547" .283" .218" .069" .180"
4 .697" .260" .241" .092" .180"
5 .847" .237" .264" .115" .180"
6 .997" .214" .287" .138" .180"
7 .191" n/a n/a n/a n/a


Key Blank Plug Diameter Shoulder to First Cut Root to Root Depth Increment Cut Width MACS
1176, KW1 ~.498" .247" .150" .023" .080" 4


Disassembly instructions

The Classic can be disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying.

  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.


Removing cylinders from Kwikset knobs

  1. Using the Cylinder Removing Tool, rotate the round spindle until the tab lines up with the bolt stems.[1]
  2. Slide the tool under the spring housing behind the spindle and push to release the retainer. Pull out the spindle without rotating it.
  3. Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all the way in and apply pressure until the cylinder is forced out of the front of the knob.

Vulnerabilities

The Classic may be vulnerable to one or more of the following:

Notes

Gallery

References

See also