Kwikset Classic: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (added knob cylinder removal instructions)
Line 55: Line 55:
== How to Remove the Cylinder from the Kwikset Knob ==
== How to Remove the Cylinder from the Kwikset Knob ==


# Using the Cylinder Removing Tool, rotate the round spindle until the tab lines up with the bolt stems.<ref>Kwikset Rekeying Manual [www.kwikset.com/Libraries/Literature/Rekeying_Manual.sflb.ashx].</ref>
# Using the Cylinder Removing Tool, rotate the round spindle until the tab lines up with the bolt stems.<ref>Kwikset Rekeying Manual [http://www.kwikset.com/Libraries/Literature/Rekeying_Manual.sflb.ashx].</ref>
# Slide the tool under the spring housing behind the spindle and push to release the retainer. Pull out the spindle without rotating it.
# Slide the tool under the spring housing behind the spindle and push to release the retainer. Pull out the spindle without rotating it.
# Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all the way in and apply pressure until the cylinder is forced out of the front of the knob.
# Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all the way in and apply pressure until the cylinder is forced out of the front of the knob.


== Vulnerabilities ==
== Vulnerabilities ==

Revision as of 23:48, 1 November 2011

Kwikset Classic

The standard Kwikset cylinder is a pin-tumbler lock. It uses five chambers of key pins, drivers, and springs. In the United States, it is one of the most common cylinders used in residential door locks.


Principles of Operation

The standard Kwikset cylinder uses five chambers of pins that span the gap between the plug and the shell, preventing rotation of the plug within the shell. There are six key pin heights, and seven key cut depths with the use of master pins. Kwikset uses key pins that are slightly tapered on both ends.


Specifications

Key blank 1176, KW1

Estimated plug diameter .498"

Shoulder to first cut .247", spacing center to center .150"

Depth increment .023"

Cut width .080"

MACS = 4


Cut | Spacing | Depth | Key Pin | Master | Driver

1     .247"     .329"   .172"     .023"    .180"

2     .397"	.306"   .195"     .046"    .180"

3     .547"	.283"   .218"     .069"    .180"

4     .697"	.260"   .241"     .092"    .180"

5     .847"	.237"   .264"     .115"    .180"

6     .997"	.214"   .287"     .138"    .180"

7               .191"

Disassembly instructions

  1. Remove the cylinder from the housing, either by removing the screws (deadbolts) or releasing the retaining clips (key in knob cylinders).
  2. Remove the C-clip plug retainer from the cylinder.
  3. Remove the plug from the core, either by using a working key or manipulating the pins so that they do not block the shear line.


How to Remove the Cylinder from the Kwikset Knob

  1. Using the Cylinder Removing Tool, rotate the round spindle until the tab lines up with the bolt stems.[1]
  2. Slide the tool under the spring housing behind the spindle and push to release the retainer. Pull out the spindle without rotating it.
  3. Slide the tool into the empty spindle chamber, angling it to bypass the cover at the top of the hole. Push the tool all the way in and apply pressure until the cylinder is forced out of the front of the knob.

Vulnerabilities

Gallery

References

  1. Kwikset Rekeying Manual [1].

See also