Kale Kilit 164 BNE: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (no HPC)
m (→‎Gallery: <div align="center">)
 
(One intermediate revision by the same user not shown)
Line 12: Line 12:
| spec_comp    = 10
| spec_comp    = 10
}}
}}
The '''164 BNE''' is a door cylinder lock made by the Turkish company [[Kale Kilit]]. It is a [[dimple|dimple lock]] that uses the flat side of the key blade as a bitting area.


The '''164 BNE''' is a [[dimple]] lock made by [[Kale Kilit]].
== Principles of operation ==
 
The 164 BNE utilizes [[dimple]] keys but functions the same as a standard [[Pin_tumbler |pin-tumbler]] lock. The key is bitted on both sides of the blade and is reversible. The lock uses ten chambers for pin-tumbler stacks. Five chambers in a row on the top of the keyway and five chambers in a row on the bottom. Each of those chambers contains a set of key pin, driver, and spring. To open the lock, all ten pin-tumblers must be aligned at the [[shear line]]. ''(See also [[Pin_tumbler#Principles_of_operation|Pin-tumbler, Principles of operation]])''
 
Kale Kilit utilizes a variety of security features to deter picking. At least two of the brass driver pins in the bottom row are spooled [[security pin]]s. The driver pins of the bottom row are T-pins. The use of multiple rows of opposing pins in the 164 BNE adds another obstacle through a less-common implementation of this design. The pins of the top row are directly opposite pins from the bottom row and touch in the middle when the key is not present. This configuration complicates picking because the force of the much stronger bottom springs [[overset]]s the pins of the top row. Picking attacks tend to rely on dedicated tools to work around this initial state. The [[ABUS EC700]] is another lock that shares this design feature.
 
== Disassembly instructions ==
The use of a [[pinning shoe]] is the preferred method for disassembling a double euro cylinder. Another method is to use a [[Plug_follower |segmented follower]]. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated to approximately 4:30 or 7:30 o'clock position -- 135 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core. Particular care must be taken as each chamber position contains pins on bot top and bottom of the core and cylinder housing. Use of [[Core shim|core shims]] is strongly recommended.
 
Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above.


<!-- == Principles of operation == -->
<!-- == Model variations == -->
<!-- == Construction == -->
<!-- == Disassembly instructions == -->
<!-- == Vulnerabilities == -->


== Gallery ==
== Gallery ==
<gallery align="center">
<div align="center"><gallery align="center">
File:Kale Kilit 164 BNE - front - FXE47654.jpg | Kale Kilit 164 BNE - front
File:Kale Kilit 164 BNE - front - FXE47654.jpg | Kale Kilit 164 BNE - front
File:Kale Kilit 164 BNE - key - FXE47660.jpg | Kale Kilit 164 BNE - key
File:Kale Kilit 164 BNE - key - FXE47660.jpg | Kale Kilit 164 BNE - key
File:Kale Kilit 164 BNE - pins - FXE46966.jpg | Kale Kilit 164 BNE - pins
File:Kale Kilit 164 BNE - pins - FXE46966.jpg | Kale Kilit 164 BNE - pins
File:Kale Kilit 164 BNE - cut euro cylinder - FXE47663.jpg | Kale Kilit 164 BNE - cut euro cylinder
File:Kale Kilit 164 BNE - cut euro cylinder - FXE47663.jpg | Kale Kilit 164 BNE - cut euro cylinder
</gallery>
</gallery></div>


<!-- == External links == -->
<!-- == External links == -->

Latest revision as of 12:31, 3 February 2023

Kale Kilit 164 BNE



Kale Kilit 164 BNE
Kale Kilit 164 BNE - keyway - FXE47654.jpg
Name Kale Kilit 164 BNE
Manufacturer Kale Kilit
Lock Type Cylinder
Lock Design Pin-tumbler, Dimple
Specifications
# of Components 10
Component Type Pin-tumbler

The 164 BNE is a door cylinder lock made by the Turkish company Kale Kilit. It is a dimple lock that uses the flat side of the key blade as a bitting area.

Principles of operation

The 164 BNE utilizes dimple keys but functions the same as a standard pin-tumbler lock. The key is bitted on both sides of the blade and is reversible. The lock uses ten chambers for pin-tumbler stacks. Five chambers in a row on the top of the keyway and five chambers in a row on the bottom. Each of those chambers contains a set of key pin, driver, and spring. To open the lock, all ten pin-tumblers must be aligned at the shear line. (See also Pin-tumbler, Principles of operation)

Kale Kilit utilizes a variety of security features to deter picking. At least two of the brass driver pins in the bottom row are spooled security pins. The driver pins of the bottom row are T-pins. The use of multiple rows of opposing pins in the 164 BNE adds another obstacle through a less-common implementation of this design. The pins of the top row are directly opposite pins from the bottom row and touch in the middle when the key is not present. This configuration complicates picking because the force of the much stronger bottom springs oversets the pins of the top row. Picking attacks tend to rely on dedicated tools to work around this initial state. The ABUS EC700 is another lock that shares this design feature.

Disassembly instructions

The use of a pinning shoe is the preferred method for disassembling a double euro cylinder. Another method is to use a segmented follower. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated to approximately 4:30 or 7:30 o'clock position -- 135 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core. Particular care must be taken as each chamber position contains pins on bot top and bottom of the core and cylinder housing. Use of core shims is strongly recommended.

Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above.


Gallery


See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.