IKON TK5

From Lockwiki
Revision as of 00:18, 12 January 2023 by Mgsecure (talk | contribs) (→‎Gallery: add security card photo)
Jump to navigationJump to search

IKON TK5



IKON TK5
IKON TK5 keyway 01 crop-SiskoSpaceman.png
Name IKON TK5
Manufacturer IKON
Lock Type Cylinder
Lock Design Pin-tumbler, Sidebar
Specifications
# of Components 9
Component Type Pin-tumbler

The TK5 is a pin-tumbler lock made by the German company IKON. The key bow bears the mark of Bo Widén.

Principles of operation

The TK5 contains five traditional pin-tumblers at the top of the keyway. It also utilizes four finger pins that must be rotated and lifted to shear line in order for the cylinder to turn and open the lock.

Disassembly instructions

The TK5 is disassembled in the same way as other euro profile cylinders though extra attention must be paid to the sidebar and side pins during disassembly.

The use of a pinning shoe is the preferred method for disassembling a double euro cylinder. Another method is to use a segmented follower. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated 30-45 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core.

Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above.

Gallery

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.