CISA C2000: Difference between revisions
(Created CISA C2000 page.) |
mNo edit summary |
||
| Line 15: | Line 15: | ||
}} | }} | ||
''' | The '''C2000''' is a [[pin-tumbler]] lock made by [[CISA]]. CISA recommends them for securing the secondary accesses to residential buildings, shops and offices. Its keys are free to copy, one key pin and one driver pin made of steel provide some drill protection but unfortunately there is no protection against dynamic methods. The [[CISA C3000]] is an improved version of the C2000. | ||
__TOC__ | __TOC__ | ||
<br clear="all"> | <br clear="all"> | ||
== | == Principles of operation == | ||
The lock contains five pin stacks, one chamber contains standard driver, two have spools and two have standard drivers with a single wide serration on both ends. Although the lock appear quite precisely manufactured, the | |||
:''See also: [[Pin-tumbler#Principles_of_Operation|Pin-Tumbler (Principles of Operation)]]'' | |||
The lock contains five pin stacks, one chamber contains standard driver, two have spools and two have standard drivers with a single wide serration on both ends. Although the lock appear quite precisely manufactured, the shear-line was ground, which lowers the amount of anti-picking protection this lock offers. | |||
The keyway is not particularly restrictive, although the curve in the lower right side of it makes counter-clockwise tensioning quite unstable due to the tensioner slippage. | The keyway is not particularly restrictive, although the curve in the lower right side of it makes counter-clockwise tensioning quite unstable due to the tensioner slippage. | ||
== | == Disassembly instructions == | ||
To disassemble a double euro cylinder, use of a pinning shoe is the preferred method. | To disassemble a double euro cylinder, use of a pinning shoe is the preferred method. | ||
Revision as of 18:02, 24 March 2022
CISA C2000
| CISA C2000 | |
 | |
| Name | CISA C2000 |
|---|---|
| Manufacturer | CISA |
| Lock Type | Cylinder |
| Lock Design | Pin-tumbler |
The C2000 is a pin-tumbler lock made by CISA. CISA recommends them for securing the secondary accesses to residential buildings, shops and offices. Its keys are free to copy, one key pin and one driver pin made of steel provide some drill protection but unfortunately there is no protection against dynamic methods. The CISA C3000 is an improved version of the C2000.
Principles of operation
- See also: Pin-Tumbler (Principles of Operation)
The lock contains five pin stacks, one chamber contains standard driver, two have spools and two have standard drivers with a single wide serration on both ends. Although the lock appear quite precisely manufactured, the shear-line was ground, which lowers the amount of anti-picking protection this lock offers. The keyway is not particularly restrictive, although the curve in the lower right side of it makes counter-clockwise tensioning quite unstable due to the tensioner slippage.
Disassembly instructions
To disassemble a double euro cylinder, use of a pinning shoe is the preferred method.
Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.
Vulnerabilities
The CISA C2000 is vulnerable to one or more of the following:
Gallery
CISA C2000 key.
CISA C2000 keyway detail.
CISA C2000 pins detail. The mangled springs in first two chambers were present in this condition in the lock when it was bought.
CISA C2000 shearline detail.
References
