American Lock 30: Difference between revisions

From Lockwiki
Jump to navigationJump to search
mNo edit summary
 
Line 36: Line 36:
[[Category:Padlocks]]
[[Category:Padlocks]]
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]
[[Category:Lock models]]

Latest revision as of 13:49, 22 December 2022

American Lock 30

American Lock 30
American30.JPG
Name American Lock 30
Manufacturer American Lock
Lock Type Padlock, Cylinder
Lock Design Pin-tumbler


The 30 is a pin-tumbler padlock made by American Lock. This is one of the cheaper padlocks American Lock makes. It contains both serrated security pins for both key and driver pins.


Principles of operation

The series 30 padlock is a standard pin tumbler lock which, though it sometimes has room for a 6th pin stack, comes pinned in 5 chambers. The bottom pins come in both serrated and plain, and the top pins come as spooled, spoorated, and serrated top pins. When all of the pins are lifted to the shear line by the key the plug can turn clockwise. The 30 series often has high tension on the plug and can require more force than normal to turn the plug once it has been picked open.

Disassembly instructions

Once the padlock is opened, the shackle can be turned and a rivet can be hammered out of the lock. This removal of the rivet should drop off the bottom plug retainer allowing the plug to be removed (This cannot be replaced after it has been done). After the plug is out the same standard disasembly applies:

  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.


See also