FAB 200 - Revision history

Sandplum: spec, category, clean-up

2022-12-27T20:45:28Z

spec, category, clean-up

← Older revision		Revision as of 20:45, 27 December 2022
Line 4:		Line 4:
	\| name = FAB 200		\| name = FAB 200
	\| Img = File:FAB200_least.png		\| Img = File:FAB200_least.png
	\| maker = [[~~Fab~~]]		\| maker = [[FAB]]
	\| lock_type = [[Cylinder]]		\| lock_type = [[Cylinder]]
	\| lock_design = [[Pin_tumbler\|Pin-tumbler]]		\| lock_design = [[Pin_tumbler\|Pin-tumbler]]
	\| patent = CZ303220B6		\| patent = [https://patents.google.com/patent/CZ303220B6/en?oq=patent+CZ303220B6 CZ303220B6]
	\| years_produced =		\| years_produced =
	\| related =		\| related =
	\| spec_on =		\| spec_on = true
	\| spec_comptype =		\| spec_comptype = [[Pin_tumbler\|Pin-tumbler]]
	\| spec_comp =		\| spec_comp = 5
	}}		}}

	'''FAB 200''' is a line of [[pin-tumbler]] lock [[cylinder]]s belonging to a resistance class 3 (according to CSN P EN1627:2000). It is recommended to secure front doors of flats, houses and offices. The original FAB 200 line was superseded by the FAB 200RS line, which used new key blanks. The FAB 200RS evolved into FAB 200RSG line, which added some security features (mainly core pulling protection), but due to more time consuming and tedious maintenance it faced big pushback from the locksmithing community. The FAB 200RSG line is now discontinued and FAB 200RSB is sold instead, offering increased anti-drill protection.		'''FAB 200''' is a line of [[Pin_tumbler \|pin-tumbler]] lock [[cylinder]]s belonging to a resistance class 3 (according to CSN P EN1627:2000). It is recommended to secure front doors of flats, houses and offices. The original FAB 200 line was superseded by the FAB 200RS line, which used new key blanks. The FAB 200RS evolved into FAB 200RSG line, which added some security features (mainly core pulling protection), but due to more time consuming and tedious maintenance it faced big pushback from the locksmithing community. The FAB 200RSG line is now discontinued and FAB 200RSB is sold instead, offering increased anti-drill protection.

	The FAB 200 line is the first, offering the protection against the unauthorized copying of the key; locksmith will cut/copy a key only when presented with the security card.		The FAB 200 line is the first, offering the protection against the unauthorized copying of the key; locksmith will cut/copy a key only when presented with the security card.
Line 25:		Line 25:
	== FAB 200 ==		== FAB 200 ==
	=== Description ===		=== Description ===
	The lock contains five pin stacks, with two ~~chambers~~ containing standard drivers, two ~~chambers contain~~ spools and there is one [[RBC]] pin (note the older RBC pin style).		The lock contains five pin stacks, with two stacks containing standard drivers and two stacks containing spools, and there is one RBC pin (note the older RBC pin style).

	The profile used is mildly paracentric, but doesn't add much to the protection against lockpicking.		The profile used is mildly paracentric, but doesn't add much to the protection against lockpicking.
Line 48:		Line 48:
	The main difference of the FAB 200RS line is the use of a shoulderless key, with a notch in its nose; this notch interacts with a steel wire insert in the core and prevents the key from entering too deep.		The main difference of the FAB 200RS line is the use of a shoulderless key, with a notch in its nose; this notch interacts with a steel wire insert in the core and prevents the key from entering too deep.

	The lock contains five pin stacks, with two ~~chambers~~ containing the standard drivers, two ~~chambers hold~~ [[RBC]] pins and there is a single spool. This hints that the dynamic methods are ~~percieved~~ as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).		The lock contains five pin stacks, with two stacks containing the standard drivers, two stacks containing [[RBC]] pins, and there is a single spool. This hints that the dynamic methods are perceived as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).

	The profile used is mildly paracentric, but in combination with well placed RBC pins can make picking a problem.		The profile used is mildly paracentric, but in combination with well placed RBC pins, can make picking a problem.

	=== Dissassembly instructions ===		=== Dissassembly instructions ===
Line 76:		Line 76:
	The lock contains five pin stacks, with two chambers containing the standard drivers, two chambers hold [[RBC]] pins and there is a single spool. This hints that the dynamic methods are percieved as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).		The lock contains five pin stacks, with two chambers containing the standard drivers, two chambers hold [[RBC]] pins and there is a single spool. This hints that the dynamic methods are percieved as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).

	The profile used is mildly paracentric, but in combination with well placed RBC pins can make picking a problem.		The profile used is mildly paracentric, but in combination with well placed RBC pins, can make picking a problem.

	=== Dissassembly instructions ===		=== Dissassembly instructions ===
Line 145:		Line 145:
	[[Category:Lock models]]		[[Category:Lock models]]
	[[Category:Pin-tumbler locks]]		[[Category:Pin-tumbler locks]]
			[[Category:Paracentric keyways]]

Datagram at 21:18, 24 March 2022

2022-03-24T21:18:47Z

← Older revision		Revision as of 21:18, 24 March 2022
Line 31:		Line 31:
	Note the key is using the usual shoulder stop.		Note the key is using the usual shoulder stop.

	=== ~~Dissassembly~~ instructions ===		=== Disassembly instructions ===
	To disassemble a double euro cylinder, use of a pinning shoe is the preferred method.		To disassemble a double euro cylinder, use of a pinning shoe is the preferred method.

Datagram at 17:23, 24 March 2022

2022-03-24T17:23:46Z

← Older revision		Revision as of 17:23, 24 March 2022
Line 15:		Line 15:
	}}		}}

	'''FAB 200''' is a line of ~~locks~~ belonging to a resistance class 3 (according to CSN P EN1627:2000). It is recommended to secure front doors of flats, houses and offices. The original FAB 200 line was superseded by the FAB 200RS line, which used new key blanks. The FAB 200RS evolved into FAB 200RSG line, which added some security features (mainly core pulling protection), but due to more time consuming and tedious maintenance it faced big pushback from the locksmithing community. The FAB 200RSG line is now discontinued and FAB 200RSB is sold instead, offering increased anti-drill protection.		'''FAB 200''' is a line of [[pin-tumbler]] lock [[cylinder]]s belonging to a resistance class 3 (according to CSN P EN1627:2000). It is recommended to secure front doors of flats, houses and offices. The original FAB 200 line was superseded by the FAB 200RS line, which used new key blanks. The FAB 200RS evolved into FAB 200RSG line, which added some security features (mainly core pulling protection), but due to more time consuming and tedious maintenance it faced big pushback from the locksmithing community. The FAB 200RSG line is now discontinued and FAB 200RSB is sold instead, offering increased anti-drill protection.

	The FAB 200 line is the first, offering the protection against the unauthorized copying of the key; locksmith will cut/copy a key only when presented with the security card.		The FAB 200 line is the first, offering the protection against the unauthorized copying of the key; locksmith will cut/copy a key only when presented with the security card.

Least: Added the patent.

2021-11-23T19:55:02Z

Added the patent.

← Older revision		Revision as of 19:55, 23 November 2021
Line 7:		Line 7:
	\| lock_type = [[Cylinder]]		\| lock_type = [[Cylinder]]
	\| lock_design = [[Pin_tumbler\|Pin-tumbler]]		\| lock_design = [[Pin_tumbler\|Pin-tumbler]]
	\| patent =		\| patent = CZ303220B6
	\| years_produced =		\| years_produced =
	\| related =		\| related =

Least: FAB 200 page created.

2021-10-19T16:17:55Z

FAB 200 page created.

New page

=FAB 200=

{{Lock model
| name = FAB 200
| Img = File:FAB200_least.png
| maker = [[Fab]]
| lock_type = [[Cylinder]]
| lock_design = [[Pin_tumbler|Pin-tumbler]]
| patent =
| years_produced =
| related =
| spec_on =
| spec_comptype =
| spec_comp =
}}

'''FAB 200''' is a line of locks belonging to a resistance class 3 (according to CSN P EN1627:2000). It is recommended to secure front doors of flats, houses and offices. The original FAB 200 line was superseded by the FAB 200RS line, which used new key blanks. The FAB 200RS evolved into FAB 200RSG line, which added some security features (mainly core pulling protection), but due to more time consuming and tedious maintenance it faced big pushback from the locksmithing community. The FAB 200RSG line is now discontinued and FAB 200RSB is sold instead, offering increased anti-drill protection.

The FAB 200 line is the first, offering the protection against the unauthorized copying of the key; locksmith will cut/copy a key only when presented with the security card.

__TOC__
<br clear="all">

== FAB 200 ==
=== Description ===
The lock contains five pin stacks, with two chambers containing standard drivers, two chambers contain spools and there is one [[RBC]] pin (note the older RBC pin style).

The profile used is mildly paracentric, but doesn't add much to the protection against lockpicking.

Note the key is using the usual shoulder stop.

=== Dissassembly instructions ===
To disassemble a double euro cylinder, use of a pinning shoe is the preferred method.

Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.

=== Gallery ===
<div align="center"><gallery>
File:FAB200_pins_least.png|Detail of FAB 200 pins.
File:FAB200_key_least.png|FAB 200 key.
File:FAB200_keyway_least.png|Detail of FAB 200 keyway.
File:FAB200_security_card_least.png|FAB 200 security card.
</gallery></div>

== FAB 200RS ==
=== Description ===
The main difference of the FAB 200RS line is the use of a shoulderless key, with a notch in its nose; this notch interacts with a steel wire insert in the core and prevents the key from entering too deep.

The lock contains five pin stacks, with two chambers containing the standard drivers, two chambers hold [[RBC]] pins and there is a single spool. This hints that the dynamic methods are percieved as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).

The profile used is mildly paracentric, but in combination with well placed RBC pins can make picking a problem.

=== Dissassembly instructions ===
Due to the RS element presence, use of a pinning shoe is no longer an option.

Segmented follower has to be used, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.

=== Gallery ===
<div align="center"><gallery>
File:FAB200RS_least.png|FAB 200RS front.
File:FAB200RS_pins_least.png|Detail of FAB 200RS pins.
File:FAB200RS_key_least.png|FAB 200RS key.
File:FAB200RS_keyway_least.png|Detail of FAB 200RS keyway.
File:FAB200RS_core_key_least.png|FAB 200RS core with the key inserted.
</gallery></div>

== FAB 200RSG ==
=== Description ===
The most visible difference of the FAB 200RSG line is the use of a new key, designed in such a way, that it can be used in FAB 200RS locks, but not vice versa. The core doesn't contain the RS wire element, but it has a steel insert (crimped in), which interacts with the key's spine; if a usual RS key is inserted, the insert will catch the nose and prevents full insertion of the key. The RSG key has the front part of its spine removed (up to the notch) and this acts as a stop for the key.

There is also a secondary mechanism preventing use of non RSG keys - the L-shaped wire insert rides in a groove in the lock bible; this groove doesn't have the same depth everywhere, it is deeper on top and shallower towards the bottom. When the RSG key is inserted, the L-shaped element ends in the notch in the key's spine and allows full rotation of the core; when a key without this notch is inserted, the wire will jam in the groove, preventing the core rotation. This mechanism also prevents core removal using the normal RSG key, as the notch is not deep enough to let the wire sink down deep enough to escape from the groove. For disassembly a special "service" key has to be used (it has to be cut to the profile of the original key) and that was a part of the reason why locksmiths dismissed this line of locks (plus often lock had to be send to the manufacturer for repair).

Looking at the key, there is also a cut on its right side, that hints to a possible checkpin, that has to be lifted to a certain height, but nothing that would interact with it is present in the core.

The lock contains five pin stacks, with two chambers containing the standard drivers, two chambers hold [[RBC]] pins and there is a single spool. This hints that the dynamic methods are percieved as a bigger threat than classical picking (although the RBC pins can frustrate picking as well).

The profile used is mildly paracentric, but in combination with well placed RBC pins can make picking a problem.

=== Dissassembly instructions ===
Due to the RSG element and the steel core insert, use of a pinning shoe is no longer an option.

When disassembling the lock with a key, the notch in its spine has to be 0.5mm deeper than in a normal RSG key. Then the core has to be rotated 180 degrees and pulled only enough for the wire element to clear the groove. Then the core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.

When disassembling the lock without a key, the wire element has to clear the groove to allow the removal of the core. It can be usually achieved by tapping with the lock on a firm surface in such a direction, that the wire is forced by the inertia into the core. Also being in a shallower part of the groove helps, but be careful with application of force when pulling the core out to avoid the rapid disassembly event. When the wire element clears the groove, follow the above directions for the disassembly.

=== Gallery ===
<div align="center"><gallery>
File:FAB200RSG_least.png|FAB 200RSG front.
File:FAB200RSG_pins_least.png|Detail of FAB 200RSG pins.
File:FAB200RSG_keyway_least.png|Detail of FAB 200RSG keyway.
File:FAB200RSG_key_least.png|FAB 200RSG key.
File:FAB200RSG_core_top_least.png|Top of the FAB 200RSG core - note the steel insert and the hole for the wire element.
File:FAB200RSG_core_bottom_least.png|Bottom of the FAB 200RSG core - the groove is a weak point to protect against the core pulling.
File:FAB200RSG_core_key_least.png|FAB 200RSG core with a key inserted - the wire element rides in a groove in the bible.
File:FAB200RSG_groove_top_least.png|Top of the FAB 200RSG bible with a groove for the wire element.
File:FAB200RSG_groove_bottom_least.png|Bottom of the FAB 200RSG bible with a groove for the wire element.
File:FAB200RSG_service_key_least.png|FAB 200RSG handmade service key - hand filed the notch in the spine.
</gallery></div>

== FAB 200RSB ==
=== Description ===
After the FAB 200RSG problems, FAB returned back to the RS line, but added the anti-drill protection in the form of two inserts in the bible protecting the pinstacks, two more inserts in the core and also added two steel driver pins.
It also seems that FAB reuses (where possible) parts of RSG line locks - this particular lock had a bible that was meant for the FAB 200RSG (has the groove for the wire element).

=== Dissassembly instructions ===
Due to the RS element presence, use of a pinning shoe is no longer an option.

Segmented follower has to be used, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.

=== Gallery ===
<div align="center"><gallery>
File:FAB200RSB_least.png|FAB 200RSB front.
File:FAB200RSB_pins_least.png|Detail of FAB 200RSB pins.
File:FAB200RSB_key_least.png|FAB 200RSB key.
File:FAB200RSB_keyway_least.png|Detail of FAB 200RSB keyway.
File:FAB200RSB_core_key_least.png|FAB 200RSB core with the key inserted.
File:FAB200RSB_core_bottom_least.png|Bottom of the FAB 200RSB core with the anti-drill inserts.
File:FAB200RSB_bible_bottom_least.png|Bottom of FAB 200RSB bible with the anti-drill inserts.
File:FAB200RSB_bible_groove_least.png|FAB 200RSB bible - reuse from the 200RSG line.
</gallery></div>

== Vulnerabilities ==

The FAB 200 is vulnerable to one or more of the following:

* [[Lockpicking]]
* [[Decoding]]
* [[Key bumping]] - when RBC pins are worked around
* [[Impressioning]] - provided you can get a proper blank

== References ==
<references />

== See also ==

* [[Fab|FAB]]
* [https://www.fab.cz/cs/site/fabcz/produkty/cylindricke-vlozky/fab-200/ FAB 200RSG product page]
* [https://www.fab.cz/cs/site/fabcz/produkty/cylindricke-vlozky/fab-200rsb/ FAB 200RSB product page]
* [https://youtu.be/70hntdrgh9M FAB 200RS family - Info, pick and gut]
* [https://youtu.be/B1hW6eguiUU FAB 200RSG - Info, pick and gut]

[[Category:FAB]]
[[Category:Lock models]]
[[Category:Pin-tumbler locks]]