Template:Pin-tumbler standard disassembly

From Lockwiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.
[edit] [purge] Template-info.svg Template documentation

This template is used on lock-specific pages in the Disassembly instructions section.

This particular template is used for pin-tumbler cylinders that require the standard disassembly procedures, without concern for additional components or any special considerations (such as trap pins, ball bearings, etc).