Plug follower

From Lockwiki
Revision as of 16:24, 23 December 2009 by Datagram (talk | contribs) (Adding stub)
Jump to navigationJump to search

Plug Follower

A plug follower is a locksmithing tool used in the rekeying of pin-tumbler locks. They are made of metal or plastic and have a cylindrical shape. The diameter of most plug followers is 0.495 to 0.500 inches, but can vary depending on the brand of lock cylinder the follower is being used with. The plug follower slides into a cylinder housing at the same time the plug is being removed. This prevents the top pins and springs from falling out of the cylinder housing and speeds up the rekeying process.

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.