From Lockwiki
Revision as of 12:27, 6 February 2009 by Datagram (Talk | contribs)
Jump to: navigation, search



The plug (also known as core) is the movable piece of a locking cylinder, located in the middle of the cylinder itself. The plug's movement is restricted by the locking components until all components are in the correct position through the action of a key. Once the plug can rotate, it actuates the locking bolt to retract or extend, thus locking or unlocking the lock.


The plug was first invented by Linus Yale, Jr. during the creation of the Yale Cylinder Lock in the mid-1800s.

Resistance to Compromise

Because the plug is integral to the security of the locking system many security enhancements exist to protect against various attacks.

  • A round mating surface with the cylinder. This improves tolerance between the plug and cylinder to improve picking resistance.
  • A lip or bevel on the user facing end of the plug to prevent shimming and other forms of bypass. This also makes disassembly easier by only allowing the plug to be removed and inserted in one direction.
  • Construction keying features, normally to catch ball-bearings from the pin chambers and provide key control during and after construction of a building.

See also

Personal tools