Plug: Difference between revisions

From Lockwiki
Jump to navigationJump to search
mNo edit summary
No edit summary
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
= Plug =
= Plug =


The '''plug''' (also known as core) is the movable piece of a locking [[cylinder]], located in the middle of the cylinder itself. The plug's movement is restricted by the locking components until all components are in the correct position through the action of a [[Key|key]]. Once the plug can rotate, it actuates the locking [[Bolt|bolt]] to retract or extend, thus locking or unlocking the lock.
[[Image:Lockwiki_Plug_Cylinder_exposed.jpg|thumb|200px|A [[Pin_tumbler|pin-tumbler]] cylinder with plug exposed.]]
[[Image:Lockwiki_Plug_side.jpg|thumb|200px|A pin-tumbler plug with six pin chambers.]]
 
The '''plug''' (or '''core''') is the movable piece of a locking [[cylinder]], located in the middle of the cylinder itself. The plug's movement is restricted by the locking components until all components are in the correct position through the action of a [[key]]. Once the plug can rotate, it actuates the locking [[bolt]] to retract or extend, thus locking or unlocking the lock.
 
__TOC__


== History ==
== History ==


The plug was first invented by [[Linus_Yale_Jr|Linus Yale, Jr.]] during the creation of the Yale Cylinder Lock in the mid-1800s.
The plug was first invented by [[Linus_Yale_Jr|Linus Yale, Jr.]] during the creation of the Yale Cylinder Lock in the mid-1800s.
 
Design changes since Yale's time have been relatively minor and usually only to accomodate secondary locking mechanisms, such as [[sidebar]]s or [[side pin]]s.


== Resistance to Compromise ==
== Resistance to Compromise ==
Line 15: Line 22:
* A lip or bevel on the user facing end of the plug to prevent shimming and other forms of [[Bypass|bypass]]. This also makes disassembly easier by only allowing the plug to be removed and inserted in one direction.
* A lip or bevel on the user facing end of the plug to prevent shimming and other forms of [[Bypass|bypass]]. This also makes disassembly easier by only allowing the plug to be removed and inserted in one direction.


* Ball bearings to prevent [[Destructive_Entry|destructive entry]] in the form of drilling.
* Ball bearings to prevent [[destructive entry]] in the form of drilling.


* Construction keying features, normally to catch ball-bearings from the pin chambers and provide key control during and after construction of a building.
* Construction keying features, normally to catch ball-bearings from the pin chambers and provide key control during and after construction of a building.
Line 25: Line 32:
* [[Lock]]                                                                                                                                                               
* [[Lock]]                                                                                                                                                               
* [[Key]]
* [[Key]]
{{Stub}}


[[Category:Locks]]
[[Category:Locks]]

Revision as of 18:15, 9 October 2009

Plug

A pin-tumbler cylinder with plug exposed.
A pin-tumbler plug with six pin chambers.

The plug (or core) is the movable piece of a locking cylinder, located in the middle of the cylinder itself. The plug's movement is restricted by the locking components until all components are in the correct position through the action of a key. Once the plug can rotate, it actuates the locking bolt to retract or extend, thus locking or unlocking the lock.

History

The plug was first invented by Linus Yale, Jr. during the creation of the Yale Cylinder Lock in the mid-1800s.

Design changes since Yale's time have been relatively minor and usually only to accomodate secondary locking mechanisms, such as sidebars or side pins.

Resistance to Compromise

Because the plug is integral to the security of the locking system many security enhancements exist to protect against various attacks.

  • A round mating surface with the cylinder. This improves tolerance between the plug and cylinder to improve picking resistance.
  • A lip or bevel on the user facing end of the plug to prevent shimming and other forms of bypass. This also makes disassembly easier by only allowing the plug to be removed and inserted in one direction.
  • Construction keying features, normally to catch ball-bearings from the pin chambers and provide key control during and after construction of a building.

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.