Master Lock No 930
Revision as of 10:49, 4 June 2012 by A1
Master Lock No. 930
Principles of operation
Add to me!
To disassemble a Master Lock 930 padlock, do the following:
- Unlock the padlock and retract the shackle.
- Remove the retaining screw in the shackle hole using an allen wrench / hex key.
- Remove the retainer pin from the bottom of the padlock.
- Remove the keyway shield from the bottom of the padlock.
- Remove the cylinder from the padlock. Take care to not let the locking ball bearings fall out of the lock.
The 930 may be vulnerable to one or more of the following:
|This article is a stub. You can help Lockwiki by expanding it.|