Master Lock No 930: Difference between revisions

From Lockwiki
Jump to navigationJump to search
 
(6 intermediate revisions by 4 users not shown)
Line 9: Line 9:
|patent=
|patent=
|related=
|related=
| spec_on      = true
| spec_comptype = [[Pin_tumbler |Pin-tumbler]]
| spec_comp    = 5
}}
}}


The '''930''' (or '''6230''') is a [[pin-tumbler]] padlock made by [[Master Lock]]. The [[padlock]], made of steel, is solid-body with an exposed [[shackle]].  It has a removable cylinder to allow rekeying.
The '''930''' (or '''6230''') is a [[pin-tumbler]] padlock made by [[Master Lock]]. The [[padlock]], made of steel, is solid-body with an exposed [[shackle]].  It has a removable cylinder to allow rekeying and will accept Master Pro Series cylinders. Pins have been variously reported as all standard or all spooled driver pins.  
 


__TOC__
__TOC__
Line 24: Line 26:
To disassemble a Master Lock 930 padlock, do the following:
To disassemble a Master Lock 930 padlock, do the following:


1. Unlock the padlock and pull the shackle completely out, rotating it.
# Unlock the padlock and retract the shackle.
 
# Remove the retaining screw in the shackle hole using an allen wrench / hex key.
2. Using an Allen wrench, remove the retaining screw.
# Remove the retainer pin from the bottom of the padlock.
 
# Remove the keyway shield from the bottom of the padlock.
3. Remove the retainer pin from the bottom of the padlock.
# Remove the cylinder from the padlock. Take care to not let the locking ball bearings fall out of the lock.  If necessary they can be held in place with grease for reassembly.
 
4. Remove the keyway shield from the bottom of the padlock.
 
5. Remove the cylinder from the padlock. Take care to not let the locking ball bearings fall out of the lock.


== Vulnerabilities ==
== Vulnerabilities ==


As a consumer-grade padlock, the Master Lock 930 is vulnerable to the following:
The 930 may be vulnerable to one or more of the following:


* [[Lockpicking]]
* [[Lockpicking]]
Line 42: Line 40:
* [[Impressioning]]
* [[Impressioning]]
* [[Decoding]]
* [[Decoding]]
* [[Bypass]]
* [[Destructive entry]]


== See also ==
== See also ==
Line 52: Line 48:
[[Category:Master Lock|930]]
[[Category:Master Lock|930]]
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]
[[Category:Padlocks]]
[[Category:Lock models]]
{{Stub}}
{{Stub}}

Latest revision as of 14:00, 26 December 2022

Master Lock No. 930

Master Lock No. 930
Name Master Lock No. 930
Manufacturer Master Lock
Lock Type Padlock
Lock Design Pin-tumbler
Specifications
# of Components 5
Component Type Pin-tumbler


The 930 (or 6230) is a pin-tumbler padlock made by Master Lock. The padlock, made of steel, is solid-body with an exposed shackle. It has a removable cylinder to allow rekeying and will accept Master Pro Series cylinders. Pins have been variously reported as all standard or all spooled driver pins.

Principles of operation

Add to me!

Disassembly instructions

To disassemble a Master Lock 930 padlock, do the following:

  1. Unlock the padlock and retract the shackle.
  2. Remove the retaining screw in the shackle hole using an allen wrench / hex key.
  3. Remove the retainer pin from the bottom of the padlock.
  4. Remove the keyway shield from the bottom of the padlock.
  5. Remove the cylinder from the padlock. Take care to not let the locking ball bearings fall out of the lock. If necessary they can be held in place with grease for reassembly.

Vulnerabilities

The 930 may be vulnerable to one or more of the following:

See also


Stub lock.png
This article is a stub. You can help Lockwiki by expanding it.