Interchangeable core

From Lockwiki
(Difference between revisions)
Jump to: navigation, search
(Created the page, embedded photo.)
 
m (moved Interchangeable Core to Interchangeable core: Please use lowercase names where possible; wiki linking is case sensitive and lowercase makes it easier to add into a paragraph (esp when you want to pluralize, etc).)

Revision as of 07:29, 8 July 2011

Interchangeable Core

Interchangable Lock Core

An Interchangeable Core is a lock core that can be changed without fully disassembling the lock. The cores generally come in a "Figure Eight" form factor. Interchangeable cores are generally also characterized by their ability to be changed by the end user, rather than a locksmith.

Contents


Function

The opening and closing of an interchangeable core is exactly the same as it would be on a full form factor lock of the same type. (For example Pin tumbler.)

In most interchangeable cores changing of cores is done by using a special key known as a "Control Key" or "Interchange Key". This key functions as a normal key would, but it unlocks the holding mechanism for the core, allowing it to slide out.

Other interchangeable cores (mostly on padlocks) use a single retaining screw below the clasp to hold the core in place, however there is debate about if this is still technically and interchangeable core.

Security

Interchangeable cores have both security benefits and downsides.

The addition of an extra one or more pins controlled by the control key leave at least one extra possible correct position.

However the time saving benefits of an interchangeable core and the fact the work does not need to be completed by a locksmith mean that in the event of a key breach, locks can be changed quickly and efficiently by staff rather than a professional locksmith.

Personal tools