EVVA DUAL: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (→‎Gallery: more)
m (→‎Gallery: added Next)
Line 57: Line 57:
File:EVVA_DUAL_plug_side2-Reinder.png |EVVA DUAL plug.
File:EVVA_DUAL_plug_side2-Reinder.png |EVVA DUAL plug.
File:EVVA_DUAL_shell_interior-Reinder.png |EVVA DUAL shell interior.
File:EVVA_DUAL_shell_interior-Reinder.png |EVVA DUAL shell interior.
File:Next_DUAL_key_cylinder-Reinder.png |"Next" key and cylinder, showing two bitting layers on one side of the key.
</gallery></div>
</gallery></div>



Revision as of 11:49, 25 June 2021

EVVA DUAL

EVVA DUAL
EVVA DUAL keyway-Reinder.png
Name EVVA DUAL
Manufacturer EVVA
Lock Type Cylinder
Lock Design Slider, Sidebar
Year(s) Produced 2000-2009
Related Locks
EVVA DPS/DPX

EVVA DPI


The EVVA DUAL (Dual Code System ) is a dual sidebar lock made by EVVA. The DUAL uses two sidebars, each controlled by six spring-biased sliders.

History

EVVA DUAL arrived on the market in 2000, and was replaced in 2009 by EVVA ICS.

Principles of Operation

The DUAL is a slider and sidebar lock. The two sidebars are controlled by a set of six spring-biased sliders. Sliders provide picking resistance in the form of false cuts.


Disassembly instructions

1. After taking the core retention clip off, insert the key and push the back of the core until it pops out a bit, then remove the key.

2. With the bible facing up, push on the back of the core while rotating it left and right. When the key retainer plate pops up, remove it and its 2 springs.

3. Now hold the core with the bible facing down. Keep pushing on the back of the core and moving it left and right. When you've pushed it out far enough to grab and keep rotating it back and forth from the front, do so and be sure to hold both sidebars on the sides in place while you keep removing the core.


Notes

Gallery

References


See also