Template:Pin-tumbler standard disassembly

From Lockwiki
Jump to: navigation, search
  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.
[edit] [purge] Template-info.svg Template documentation

This template is used on lock-specific pages in the Disassembly instructions section.

This particular template is used for pin-tumbler cylinders that require the standard disassembly procedures, without concern for additional components or any special considerations (such as trap pins, ball bearings, etc).

Personal tools